Sale Garmin eTrex 20 Worldwide Handheld GPS Navigator

Product Description

Garmin Etrex 20 Worldwide Handheld Gps Navigator , Garmin Nuvi 2595lmt 5 Inch Portable Bluetooth Gps Navigator , Garmin Erunner 110 Gps Enabled Unisex Sport Watch , Garmin Erunner 110 Gps Enabled Sport Watch , Garmin Nuvi 1390lmt 43 Inch Portable Gps Navigator , Garmin Nuvi 14901490t 5 Inch Widescreen Bluetooth Portable Gps Navigator , Tomtom Via 1535tm 5 Inch Portable Bluetooth Gps Navigator , Garmin Nuvi 3790lmt 43 Inch Bluetooth Portable Gps Navigator , Garmin Approach S1 Waterproof Golf Gps Watch , Garmin Erunner 305 Gps Receiver With Heart Rate M Itor , Garmin Nuvi 2460lmt 5 Inch Widescreen Bluetooth Portable Gps Navigator Bu, Garmin Erunner 405 Wireless Gps Enabled Sport Watch , Garmin Erunner 405cx Gps Sport Watch , Garmin Nuvi 1350lmt 43 Inch Portable Gps Navigator , Garmin Nuvi 1490lmt 5 Inch Bluetooth Portable Gps Navigator , Garmin Nuvi 1450lmt 5 Inch Portable Gps Navigator , Garmin Gpsmap 62s Handheld Gps Navigator , Pi Eer Avic X930bt 61 In Dash Navigati Av Receiver , Garmin M Tana 650t Waterproof Hiking Gps , Garmin Nuvi 2495lmt 43 Inch Portable Bluetooth Gps Navigator , Edition: Color Display & Expandable Memory Product Description

Garmin's eTrex GPS series offers reliable satellite navigation, making it a favorite of hikers, hunters, and geocachers. The eTrex 20 is equipped with a high-sensitivity GPS receiver, a 2.2-inch color display, and ships with a worldwide basemap with relief. Add a wide array of detailed topographic, marine, and road maps, and start mapping out your next adventure.

A perfect choice for hikers, hunters, and geocachers. Click here for a larger image 2.2-inch color display and worldwide basemap with relief. The eTrex 20 is the mid-level option in Garmin's new eTrex series. See also the eTrex 10 and eTrex 30. Compatible with TOPO U.S. 24K maps (above), BlueChart cards, and City Navigator maps. A New Adventure Mapping Performance

This handheld GPS is armed with a sunlight-readable, 2.2-inch color display and a worldwide basemap with shaded relief, making it easier than ever to know where you are and where you are headed next.

With internal memory and a microSD card slot, the eTrex 20 ready for a wide array of detailed maps. Add TOPO U.S. 24K maps to hit the trail, BlueChart g2 preloaded cards for a day on the water, or City Navigator maps for turn-by-turn routing on roads.

Rock Solid GPS

With its high-sensitivity, WAAS-enabled GPS receiver, eTrex 20 will locate your position quickly and precisely, maintaining its GPS location even in heavy cover and deep canyons.

With added HotFix and GLONASS support, you can count on faster positioning and a more reliable signal--whether you're in deep woods or just near tall buildings and trees, you can count on eTrex 20 to help you find your way when you need it the most.

Rugged and Ready

The eTrex 20 is a breeze to operate, indoors and out, with five buttons on either side within easy reach. With its bright orange case and included lanyard, it's tough to lose. Plus, since the eTrex 20 is waterproof to IPX7 standards, it can take an accidental splash or dunk in the water and still continue to perform.

Find It and Go

With eTrex 20, your adventure will last, with over 20 hours of battery life on two AA batteries (rechargeable NiMH or Lithium batteries work great). As a handheld, it's plenty portable, weighing in at just 5 ounces with batteries. It's also compatible with a variety of spine mounting accesories, for use in cycling or other activities.

Paperless Geocaching

eTrex 20 also supports geocaching, a high-tech version of hide-and-seek where you explore the outdoors in search of hidden "treasure" and adventure. Geocaching is a real-world, outdoor treasure hunting game using GPS-enabled devices. Participants (members) navigate to a specific set of GPS coordinates and then attempt to find the geocache (container) hidden at that location. The eTrex 20 is the perfect way to get started.

What's in the Box

eTrex 20, USB Cable, Lanyard, Documentation

This review is from: Garmin eTrex 30 Worldwide Handheld GPS Navigator (Electronics)
My 30 arrived a few hours ago.

As you read this review, note that Rocker refers to what Garmin has now renamed the Thumb Stick.

Pros:

o The on-screen keyboard is much better designed than the old eTrex (and this issue was important enough to me to pay for a 450 last year):

.....o Stays in upper case (hallelujah) rather than, with the old eTrex, the first alpha triggering the on-screen keyboard to change to lower case and special characters, which then necessitated navigating to the shift character to restore the keyboard to upper case and numbers.

.....o DONE is easier to access as are cursor left and cursor right.

.....o Can use the Zoom keys (top left side of GPS) to switch between the three keyboards: alpha and numbers, special characters; numbers.

o The display is nice and crisp.

o Can load maps to internal memory without using an SD card (56MB of maps tested leaves 1.68GB of internal memory). The old eTrex required an SD card .

o A distance proximity alert can be created on the 30 using any waypoint or POI as a source (more info below).

o Can load maps, waypoints, and routes from MapSource (see Bugs below).

o Smaller than the eTrex Legend HCx.

o Includes place to affix a lanyard (but a lanyard is not included).

o Garmin tech support was excellent. Michael spent and hour and a half as we researched four issues including the bugs mentioned below.

o As mentioned by other reviewers, satellite acquisition is fast: first power on to location: 45 seconds.

Cons:

o The new interface seems cumbersome when compared to the old eTrex. The old interface was quicker to navigate with more data being displayed on menu screens, but maybe it will get better with more hands-on time. The new interface seems to have been designed for a touch screen, which the 30 is not. On some screens, such as the Map Information page there is a lot of wasted empty space. Tip : Use Setup > Page Sequence to add pages that you want to quickly access using the Back button; those pages will then disappear from the Main Menu.

o Testing indicates that proximity alerts for POI's loaded using the POI loader do not work. On the old eTrex Legend HCx, POI's containing speed or distance proximity alerts could be loaded using the POI Loader and the Legend HCx would issue the appropriate alerts. The POI Loader works with the 30, but testing indicates that the alert is not issued. This test was for a distance, not speed, alert (speed alerts are of no interest to me, so I'll leave that testing to someone who wants that functionality). On the other hand, proximity alerts can be manually created on the 30 using waypoints or POI's as sources. This is definitely a big Pro and is listed in the Pros above. When the user creates a proximity alert from a POI, a waypoint is created with the same name with a "1" appended at the end of the name. So, it appears that to mass load distance proximity alerts onto the 30 will require loading them as waypoints with the proximity distance set, rather than loading them as POI's. And, it appears that waypoints only support distance alerts, not speed alerts, in the 30, MapSource, and BaseCamp. A minor point: while MapSource can maintain a waypoint's proximity in miles to 3 decimal digits (0.000), the 30 supports only editing to 2 decimal digits (0.00). And, as we all know, 0.01 mile is approximately 53 feet so this is probably a non-issue for most applications.

.....o To compound the problem of not supporting proximity alerts for POI's and forcing the use of waypoints instead, Garmin has removed the capability to delete waypoints by symbol, leaving only the choices to (a) delete all waypoints or (b) delete waypoints individually. This means that if I assign special symbols to the waypoints which I want to retain permanently on the GPS while letting temporary waypoints have the default (blue flag) symbol, I cannot delete just the temporary waypoints en masse -- as the old eTrex would have supported. In order to retain the waypoints which I want permanently on the GPS, I will be forced to either a) delete the temporary waypoints individually in the field if I forget to do it at home, (b) remember to delete them in BaseCamp before departing for the outdoors, (c) remember to delete the \Garmin\GPS\Waypoints_dd-mmm-yy.gpx file before departing for the outdoors, or (d) remember to delete all waypoints and then reload all of the permanent waypoints before departing for the outdoors. (I did not realize this until after my initial review submission. I would now give a 4-star rating, rather than 5, because of this whole POI proximity alert issue and the lack of delete-waypoints-by-symbol.)

.....o Note that some of the newer Garmin GPS's (e.g., 450) say they support proximity alerts, but the functionality is limited to when a waypoint is on the route being navigated. This is a major difference from the old eTrex Legend HCx, where simply being the appropriate distance from a POI was sufficient to trigger the proximity alert - even when not navigating. In the case of the 30, proximity alerts also work when not navigating (like the old eTrex Legend HCx) but the proximity alert must be for a waypoint and not a POI.

o Another new mounting system to purchase mounts for.

Bugs:

o Cannot transfer tracks and waypoints directly from the 30 to MapSource as was supported for the old eTrex. In USB Mass Storage mode (Setup > System > USB Mode > Mass Storage) only the current track, not waypoints or archived tracks are transferred. In Garmin mode (Setup > System > USB Mode > Garmin), the current track and all archived tracks are transferred but the waypoint checkbox is greyed out in the MapSource dialog box (meaning that MapSource probably does not recognize the waypoint file on the 30). One approach for merging a single waypoint .gpx file and multiple track .gpx files is to drag and drop each .gpx file onto a separate MapSource session then copy/paste into a single MapSource session. For this to work, you would use USB Mass Storage mode. (Note that trying to drag and drop into a single MapSource session results in only the data from the last drag-and-drop being present in MapSource; it assumes replace rather than add and does not issue an error message.) Garmin indicates that BaseCamp is the future and this problem with MapSource will probably not be fixed.

o If you download maps to the GPS, the Map Information page will display one of your maps plus the two basemaps which come with the GPS. The Map Information page will not scroll beyond those three maps so you are unable to disable any maps beyond those three. My testing indicates that, regardless, all of the downloaded maps are on the GPS and the maps display correctly; the testing by the Garmin tech support person indicates that the maps were not being displayed properly on his 30 - so we have two conflicting stories. The Map Information page is accessed either by (a) Map > Menu > Setup Map > Map Information or (b) Setup > Map > Map Information. Garmin is working on a fix. Hopefully, all of the parties involved are communicating clearly but I am unsure because Garmin's suggested interim fix did not resolve the problem. The fix was to rename Garmin\gmapsupp.img (the downloaded maps) to any other name, e.g., Wyoming.img. After renaming, the Map Information page continued to display only 3 maps, but rather than displaying the name of a map segment (an area of a larger map set) it was now (after the rename) displaying the name of the map set. Given that I had downloaded 42 map segments from two different map sets, the 30 should be displaying more than one of my maps - regardless of whether it is showing map segments (as the old eTrex Legend HCx does and the 30 did prior to the rename) or map sets (as the 450 does and the 30 did after the rename).

o While in USB Mass Storage mode, performing an Eject on Win7 64-bit generates a dialog box: "An error occurred while ejecting ...". So, the 30 does not power down (as the Oregon does) and leaves the GPS's display showing the USB-connected icon. This makes me nervous about whether all files have been properly closed or whether there is potential corruption. This problem did not go away after updating the 30 firmware and rebooting the computer. No other devices are encountering this error. Garmin has no other reported incidents of this problem. I tried different cables (including the included cable), different ports, and three Win7 64-bit computers but the error message always appears. All three computers are running the latest version of BaseCamp (3.2.2), which means the computers have the latest Garmin drivers (2.3.0.0).

Tips:

o Just like the old eTrex Legend HCx, press and hold Rocker to Mark Waypoint.

o Just like the old eTrex Legend HCx, pressing the Power button cycles the brightness: medium > high > off. The user manual just describes pressing the Power button once then using the Rocker to fine tune the brightness level.)

o Just like the old eTrex Legend HCx, Menu > Menu will return to the Main Menu.

o Just like the old eTrex Legend HCx, pressing and holding the Menu button will open the Find page.

o When you first get the 30, back up all of the files on the GPS to a hard drive.

o Sometimes it is desirable to display the current time to the second rather than just hours:minutes. This can be useful when setting a camera's time for later automated synchronization of photos to tracks or waypoints. To display the current time including seconds on the 30:

.....o Alternative A: Compass > Menu > Change Dashboard > Large Data Field. The time including seconds will appear at the top of the Compass display.

.....o Alternative B: set the Trip Computer to Big Numbers and set one of the two big number fields to Time of Day (Trip Computer > Menu > Big Numbers > Menu > Change Data Fields > navigate to top or bottom big number field > enter (Rocker) > choose Time of Day from the list > enter (Rocker)).

.....o Alternative C: set the Map to display 1 big number and set that field to Time of Day (Map > Menu > Setup Map > Data Fields > 1 large > Back > Menu > Change Data Fields > enter (Rocker) > choose Time of Day from the list > enter (Rocker)).

.....o Alternative D: use the system information page, but the current time will be displayed in UTC/GMT/Zulu time, rather than local time. Turn off the 30 > hold the enter (Rocker) while pressing the Power button > release the Power button > when the system information page appears, release the Rocker. To exit the system information page, power off the 30 as you normally would.

.....Unfortunately, using the Power button to bring up the backlight display no longer displays time including seconds as it did on the old eTrex.

.....Some of the alternatives above could be implemented using Profiles.

o A firmware update (2.10 -> 2.20) is available for the eTrex 30 using BaseCamp or WebUpdater. The update adds support for advanced geocache logging.

There is more functionality to experiment with (Compass, Altimeter) but that is for another day.